|
|
|
Water Filtration Pump with a Built-in Chlorine Generator
 |
|
| Click to enlarge image(s) |
Chlorinator Filter Pump Features -
Filters & chlorinates 2000 gallons per hour by process of saline conversion chlorination
Fits all 12', 15', 18' and 24' Intex Easy Set™ Pools, Frame Set™ Pools, Soft Side Pools and Ellipse™ Pools pools as well as Aqua Leisure™ Simple-Set™ pools and San-N-Sun™ brand pools with 1.25" and 1.50" inside diameter hose connections
No chemicals needed! This amazing pump uses common table salt to produce chlorine thereby eliminating the need for dangerous chlorine chemical compounds, acids, shock treatments or any other toxic pool chemicals
Very easy to use! Touch-sensitive control panel allows user to pre-program operating hours while the flow sensor system alerts the operator to adverse operating conditions
Features a self-cleaning titanium-coated eletrolytic cell for continuos optimum performance
Safe to operate! This pump design has been tested, listed and certified by UL & CSA
Includes a waterproof on/off switch mounted on the pump
Includes all necessary fittings, clamps, strainers and hoses as well as 50 chlorine test strips and a detailed instruction manual
Chlorination Process Description
What is saline conversion chlorination? Saline chlorination is a term used for the process of converting the salt disolved in water into active liquid chlorine, known as hypochlorite, for the sanitization of swimming pool & spa water.
How does saline conversion chlorination work?
- A specific quantity of pure, non-iodized, fine grain table salt is added to the pool water to create a saltwater (saline) concentration of 0.3% (3000 parts per million). This salinity concentration is slightly less than the salinity level found in most human tears, thus it is very gentle to the swimmer's eyes and skin.
- Liquid chlorine (hypochlorite) is created through a process called electrolysis. As the water pump passes the saline through the chlorinator cell a low voltage DC current is applied to the saline. This applied energy current changes the salt disolved in the water into liquid chlorine (hypochlorite). The liquid chlorine immediately mixes with the water leaving the chlorinator cell and flows into the swimming pool as clean, chlorinated water.
- The continuous introduction of liquid chlorine will ensure the continuous sanitization of the pool's water and will not allow the growth of algae. When the liquid chlorine has destroyed the bacteria in the pool, it reverts to salt. This means that the salt is continually regenerated in the process and the only loss of salt is due to backwashing, splash-out and overflow. It may be necessary to add salt to the pool water to bring the concentration back to the desired level of 3,000 parts per million.
This form of chlorination will not damage your pool! Chlorine "tablets" or "powder" can damage the pool liner while saline conversion will not. Also, the mildly salted water will not affect the PVC plumbing, filters or pump.
Saline chlorination is easier and safer! You will not need to buy or store any dangerous chemicals as you would for a pool with an out-dated conventional filtration pump. You will not need to "shock" this pool with raw chlorine as you would with older pools. Plus, the chlorine generator is self-cleaning which makes it 100% maintenance free!
50 salinity test strips are included! The test strips will allow you to easily test the water's salinity level to determine if you need to add salt. This supply of 50 test strips should last you at least two summers.
|
|
Note: All prices in US Dollars
|
|
